So, you found a quiet place in your house, sat on your favorite couch, and opened your laptop to enjoy internet surfing or video streaming! But what's that? Oh hell! There is no WiFi signal on your laptop! This issue generally appears in sprawling homes. At times, the WiFi signal is not powerful enough to make it reach every square inch of your home. Such places are dubbed dead zones.

Luckily, there are several ways to determine and eliminate WiFi dead zones so that you can increase your network speed. Let's find out what are WiFi dead spots, why they exist, and how to fix them. Let's dive in.

What is a WiFi Dead Zone?

A WiFi dead zone is an area in your home where there is no or poor WiFi signal. You can locate these spots by taking a WiFi-enabled device connecting to your Netgear router and walking around the home. Once you reach a dead zone, the device will lose the WiFi signal.

What Causes WiFi Dead Spots?

Anything that blocks the WiFi radio waves generates a dead spot. On the off chance if you own a large home or workplace and placed your Netgear wireless router in one corner of the building, there may be a dead spot in the opposite corner of the building where the WiFi signal is unable to reach.

Most homes were designed before WiFi was intended, so the building materials and floorplan may interfere with WiFi. Old homes may include thick plaster walls that comprise of chicken cable. And this cable can interfere with WiFi signals. In addition to this, large metal objects such as metal walls and filing cabinets may also interrupt an internet connection.

Other devices like cordless phones, microwaves, wireless sound systems, wireless security systems, and baby monitors also result in blockage of WiFi signals.

How to Fix WiFi Dead Zones?

1. Reposition Your Router

Position your Netgear wireless router in a central location of your home. Thus, your router will be able to spread the WiFi signals equally in all directions.

2. Configure Your Netgear Router

Ensure that your WiFi router's wireless output power is set to 100%. Remember to configure the Netgear wireless router properly via routerlogin.net web address. Aside from this, keep in mind to use only the 802.11 protocol and ensure all your connected devices are also using the same protocol.

3. Switch to the Least Congested WiFi Channel

Log in to your Netgear router via 192.168.1.1 IP and check the channel used by your router. Be sure to choose the least-congested WiFi channel to eradicate dead zones and make internet faster.

4. Update Firmware

Is your Netgear wireless router running obsolete firmware? If so, then you may struggle with WiFi dead zones and slow internet. So, perform the Netgear router firmware update immediately.

These were our 4 simple ways to get rid of WiFi dead zones and improve your network speed. All of these things are easily doable by yourself. Happy Internet Surfing!